Beacon & JoySticks
Free shipping over 99€. Flash shipment in 48 working hours. 15 days free return guarantee. 2-year warranty.
Version
Official accessories, soaring fun.
149€
Live preview, smart tracking.
149€
Beacon & JoyStick
Lightweight, Powerful, and Innovative.
Lightweight, Powerful, and Innovative.
HOVERAir redefines control, making It more fun than ever.
HOVERAir redefines control,
making It more fun than ever.
Buy Now
WATCH VIDEO
The Beacon and JoyStick are HOVERAir's all-new remote control solution for the X1 PRO&PROMAX, offering seamless monitoring, precise control, and ultimate portability. Our tri-state JoyStick & Beacon gives you three ways to play and triple the fun, significantly expanding the possibilities of your HOVERAir flying camera experience.
Real-time monitor
The 1.78" OLED display lets you monitor footage on the go.
Customize your shots
Adjust flight and camera parameters and select flight modes directly from your Beacon.
Fly safely
Receive flight status alerts, and allow Hover to respond swiftly to sudden stops or sharp turns.
Built-in Microphone
Supports sound recording with crystal-clear audio and advanced noise reduction, with voice command to be available through future OTA updates.
Return to Home*
With OmniTerrain enabled, the Beacon allows for instant Return To Beacon*. Manual takeover available at all times for flexibility and safety.
*X1 does not support the Return to Home (RTH).*RTB requires both HOVERAir device and Beacon to be in open areas with strong GNSS signal. Only available for PRO and PROMAX devices.
Attach it anywhere
Effortlessly attach your Beacon to your handlebars or clothing with our official accessories.
Comparing Beacon & JoySticks on HOVERAir X1 and HOVERAir X1 PRO/PROMAX
Features
HOVERAir X1 + Beacon&JoyStick
HOVERAir X1 PRO / PROMAX + Beacon&JoyStick
Real-time monitoring
Real-time monitoringYes
Real-time monitoringYes
Maximum transmission range*
Maximum transmission range*50m
Maximum transmission range*1km
Maximum flight altitude
Maximum flight altitude10m above ground level
Maximum flight altitude120m above ground level
Flight mode selection
Flight mode selectionYes
Flight mode selectionYes
Camera parameter adjustment
Camera parameter adjustmentYes
Camera parameter adjustmentYes
HoverLink
HoverLinkNo
HoverLinkYes
Return-to-home (RTH)
Return-to-home (RTH)No
Return-to-home (RTH)Yes
Noise-cancellation sound recording
Noise-cancellation sound recordingYes
Noise-cancellation sound recordingYes
One-handed controller
One-handed controllerYes
One-handed controllerYes
Two-handed controller
Two-handed controllerYes
Two-handed controllerYes
*Maximum transmission range: The maximum distance is measured in vast, open areas with minimal RF interference, such as mountains or coastal regions. Actual range may vary based on the environment and smartphone model.
Please download the latest version of the Hover X1 app (v2.31.0 or later) to update your X1 or X1 Smart device. Then, use the updated X1 or X1 Smart to update the Beacon firmware before use.
FAQ
1. How do I charge the Beacon?
The beacon can be charged using the cable included in the package. You can also connect it to the joystick and charge both together via the USB Type-C port on the joystick.
2. How long does it take to charge?
The Beacon has an input power of 5W and takes about 60-90 minutes to fully charge. The JoyStick takes around 75 minutes to charge. When charging the Beacon & JoyStick together as a bundle, it takes approximately 2.5 to 3 hours. For faster charging, it's recommended to charge them separately.
3. How long does it last?
A fully charged Beacon (when connected to the device without JoySticks) lasts about 120 minutes.When using the Beacon with JoyStick A or multiple JoySticks, battery life extends to about 150 minutes. However, if used with a smartphone display, the battery life may be reduced to around 60 minutes.
4. What kind of signals are used between the Beacon and the flying camera?
The signal between the Beacon and the flying camera uses regular-band and narrow-band Wi-Fi, allowing for a 1km live transmission distance.
5. When using the Beacon +JoyStick remote control, the maximum flight range is 1 km. But how can I know how far they've flown? Is there a distance display?
Currently, there is no distance display, but we plan to add this feature in the future. If the drone exceeds the range, the video feed will start to lag.
6. Why does the update process get stuck at 100% during installation, causing the OTA update to fail?
For detailed solutions, please click the link and refer to the specific guidance on resolving the issue when stuck at 100%.
7. What features of Beacon are currently compatible with the HOVERAir X1?
The following features are currently supported on the HOVERAir X1:
- Video transmission
- Instant status updates
- In-flight parameter adjustments
- One-handed and two-handed control
- Audio recording
Please note: The HoverLink feature and Return to Home function are not supported on the HOVERAir X1.
The maximum flight altitude and distance are significantly lower than those of the HOVERAir X1 PROMAX.
To learn more about what’s compatible with the HOVERAir X1, visit our blog.
8. Are the recorded audio and video files automatically merged, or do they require manual processing?
Yes, they are automatically merged. No manual processing is needed—simply download the file with one click via the app.
9. Where does the flying camera return to when using the Return to Home function?
- In Follow Mode: The device will return to a location near the Beacon with a positioning accuracy range of 2 to 10 meters. Users will need to manually land it or allow the Beacon to take control.
- In non-follow automatic modes: By default, HOVERAir will automatically return to the takeoff point.
